Y |
Name | Schema Table | Database | Description | Type | Length | Unit | Default Value | Unified Content Descriptor |
y |
UKIDSSDetection |
WSA |
Y coordinate of detection |
real |
4 |
pixels |
|
POS_PLATE_Y |
y |
dxsDetection, dxsListRemeasurement, gcsDetection, gcsListRemeasurement, gpsDetection, gpsListRemeasurement, lasDetection, lasListRemeasurement, udsListRemeasurement |
WSA |
Y coordinate of detection {catalogue TType keyword: Y_coordinate} Intensity-weighted isophotal centre-of-gravity in Y. |
real |
4 |
pixels |
|
POS_PLATE_Y |
y |
ptsDetection |
WSATransit |
Y coordinate of detection {catalogue TType keyword: Y_coordinate} Intensity-weighted isophotal centre-of-gravity in Y. |
real |
4 |
pixels |
|
POS_PLATE_Y |
y |
udsDetection |
WSA |
Y coordinate of detection (SE: Y_IMAGE) {catalogue TType keyword: Y_coordinate} Intensity-weighted isophotal centre-of-gravity in Y. |
real |
4 |
pixels |
|
POS_PLATE_Y |
y_coadd |
twomass_xsc |
2MASS |
y (in-scan) position (coadd coord.). |
real |
4 |
arcsec |
|
INST_POS |
Y_IMAGE |
mgcDetection |
MGC |
Object y position |
real |
4 |
pixel |
|
|
Y_OFF |
mgcGalaxyStruct |
MGC |
Y offset of Galaxy Centre |
real |
4 |
|
99.99 |
|
Y_OFFm |
mgcGalaxyStruct |
MGC |
Y offset error (-) |
real |
4 |
|
99.99 |
|
Y_OFFp |
mgcGalaxyStruct |
MGC |
Y offset error (+) |
real |
4 |
|
99.99 |
|
yAperMag3 |
gcsPointSource, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
Default point/extended source Y aperture corrected mag (2.0 arcsec aperture diameter) |
real |
4 |
mag |
-0.9999995e9 |
PHOT_MAG |
yAperMag3 |
gcsSource, lasSource |
WSA |
Default point/extended source Y aperture corrected mag (2.0 arcsec aperture diameter) If in doubt use this flux estimator |
real |
4 |
mag |
-0.9999995e9 |
PHOT_MAG |
yAperMag3Err |
gcsPointSource, gcsSource, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSource, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
Error in default point/extended source Y mag (2.0 arcsec aperture diameter) |
real |
4 |
mag |
-0.9999995e9 |
ERROR |
yAperMag4 |
gcsPointSource, gcsSource, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSource, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
Extended source Y aperture corrected mag (2.8 arcsec aperture diameter) |
real |
4 |
mag |
-0.9999995e9 |
PHOT_MAG |
yAperMag4Err |
gcsPointSource, gcsSource, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSource, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
Error in extended source Y mag (2.8 arcsec aperture diameter) |
real |
4 |
mag |
-0.9999995e9 |
ERROR |
yAperMag6 |
gcsPointSource, gcsSource, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSource, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
Extended source Y aperture corrected mag (5.7 arcsec aperture diameter) |
real |
4 |
mag |
-0.9999995e9 |
PHOT_MAG |
yAperMag6Err |
gcsPointSource, gcsSource, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSource, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
Error in extended source Y mag (5.7 arcsec aperture diameter) |
real |
4 |
mag |
-0.9999995e9 |
ERROR |
yCen |
Detection |
SSA |
Intensity-weighted Y-centroid of image |
float |
8 |
microns |
|
POS_PLATE_Y |
yClass |
gcsPointSource, gcsSource, gcsSourceRemeasurement, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSource, lasSourceRemeasurement, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
discrete image classification flag in Y |
smallint |
2 |
|
-9999 |
CLASS_MISC |
yClassStat |
gcsPointSource, gcsSource, gcsSourceRemeasurement, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSource, lasSourceRemeasurement, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
N(0,1) stellarness-of-profile statistic in Y |
real |
4 |
|
-0.9999995e9 |
STAT_PROP |
yDeblend |
gcsPointSource, gcsSourceRemeasurement, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSourceRemeasurement, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
placeholder flag indicating parent/child relation in Y |
int |
4 |
|
-99999999 |
CODE_MISC |
yDeblend |
gcsSource, lasSource |
WSA |
placeholder flag indicating parent/child relation in Y |
int |
4 |
|
-99999999 |
CODE_MISC |
This CASU pipeline processing source extraction flag is a placeholder only, and is always set to zero in all passbands in the merged source lists. If you need to know when a particular image detection is a component of a deblend or not, test bit 4 of attribute ppErrBits (see corresponding glossary entry) which is set by WFAU's post-processing software based on testing the areal profiles aprof2-8 (these are set by CASU to -1 for deblended components, or positive values for non-deblended detections). We encode this in an information bit of ppErrBits for convenience when querying the merged source tables. |
yEll |
gcsPointSource, gcsSource, gcsSourceRemeasurement, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSource, lasSourceRemeasurement, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
1-b/a, where a/b=semi-major/minor axes in Y |
real |
4 |
|
-0.9999995e9 |
PHYS_ELLIPTICITY |
yeNum |
gcsMergeLog, gcsZYJHKmergeLog, lasMergeLog |
WSA |
the extension number of this Y frame |
tinyint |
1 |
|
|
NUMBER |
yeNum |
lasYJHKmergeLog |
WSA |
the extension number of this frame |
tinyint |
1 |
|
|
NUMBER |
yErr |
UKIDSSDetection |
WSA |
Error in Y coordinate |
real |
4 |
pixels |
|
ERROR |
yErr |
dxsDetection, dxsListRemeasurement, gcsDetection, gcsListRemeasurement, gpsDetection, gpsListRemeasurement, lasDetection, lasListRemeasurement, udsListRemeasurement |
WSA |
Error in Y coordinate {catalogue TType keyword: Y_coordinate_err} Estimate of centroid error. |
real |
4 |
pixels |
|
ERROR |
yErr |
ptsDetection |
WSATransit |
Error in Y coordinate {catalogue TType keyword: Y_coordinate_err} Estimate of centroid error. |
real |
4 |
pixels |
|
ERROR |
yErr |
udsDetection |
WSA |
Error in Y coordinate (SE: ERRY2_IMAGE½) {catalogue TType keyword: Y_coordinate_err} Estimate of centroid error. |
real |
4 |
pixels |
|
ERROR |
yErrBits |
gcsPointSource, gcsSourceRemeasurement, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSourceRemeasurement, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
processing warning/error bitwise flags in Y |
int |
4 |
|
-99999999 |
CODE_MISC |
yErrBits |
gcsSource, lasSource |
WSA |
processing warning/error bitwise flags in Y |
int |
4 |
|
-99999999 |
CODE_MISC |
Apparently not actually an error bit flag, but a count of the number of zero confidence pixels in the default (2 arcsec diameter) aperture. |
yEta |
gcsPointSource, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
Offset of Y detection from master position (+north/-south) |
real |
4 |
arcsec |
-0.9999995e9 |
POS_EQ_DEC_OFF |
yEta |
gcsSource, lasSource |
WSA |
Offset of Y detection from master position (+north/-south) |
real |
4 |
arcsec |
-0.9999995e9 |
POS_EQ_DEC_OFF |
When associating individual passband detections into merged sources, a generous (in terms of the positional uncertainties) pairing radius of 2.0 (UKIDSS LAS and GPS; also non-survey programmes) or 1.0 (UKIDSS GPS, DXS and UDS) arcseconds is used, the higher value enabling pairing of moving sources when epoch separations may be several years. Such a large association criterion can of course lead to spurious pairings in the merged sources lists (although note that between passband pairs, handshake pairing is done: both passbands must agree that the candidate pair is their nearest neighbour for the pair to propagate through into the merged source table). In order to help filter spurious pairings out, and assuming that large positional offsets between the different passband detections are not expected (e.g. because of source motion, or larger than usual positional uncertainties) then the attributes Xi and Eta can be used to filter any pairings with suspiciously large offsets in one or more bands. For example, for a clean sample of QSOs from the LAS, you might wish to insist that the offsets in the selected sample are all below 1 arcsecond: simply add WHERE clauses into the SQL sample selection script to exclude all Xi and Eta values larger than the threshold you want. |
yGausig |
gcsPointSource, gcsSource, gcsSourceRemeasurement, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSource, lasSourceRemeasurement, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
RMS of axes of ellipse fit in Y |
real |
4 |
pixels |
-0.9999995e9 |
MORPH_PARAM |
yHallMag |
gcsPointSource, gcsSource, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSource, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
Total point source Y mag |
real |
4 |
mag |
-0.9999995e9 |
PHOT_MAG |
yHallMagErr |
gcsPointSource, gcsSource, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSource, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
Error in total point source Y mag |
real |
4 |
mag |
-0.9999995e9 |
ERROR |
yMag |
gcsSourceRemeasurement, lasSourceRemeasurement |
WSA |
Y mag (as appropriate for this merged source) |
real |
4 |
mag |
-0.9999995e9 |
PHOT_MAG |
yMagErr |
gcsSourceRemeasurement, lasSourceRemeasurement |
WSA |
Error in Y mag |
real |
4 |
mag |
-0.9999995e9 |
ERROR |
ymax |
Detection |
SSA |
Topmost extent of image on plate |
float |
8 |
microns |
|
POS_PLATE_Y |
ymfID |
gcsMergeLog, gcsZYJHKmergeLog, lasMergeLog |
WSA |
the UID of the relevant Y multiframe |
bigint |
8 |
|
|
ID_FRAME |
ymfID |
lasYJHKmergeLog |
WSA |
the UID of the relevant multiframe |
bigint |
8 |
|
|
ID_FRAME |
ymin |
Detection |
SSA |
Bottommost extent of image on plate |
float |
8 |
microns |
|
POS_PLATE_Y |
ymj |
gcsSourceRemeasurement, lasSourceRemeasurement |
WSA |
Default colour Y-J (using appropriate mags) |
real |
4 |
mag |
|
PHOT_COLOR |
ymj_1Ext |
lasExtendedSource, lasPointSource, lasYJHKsource, reliableLasPointSource |
WSA |
Extended source colour Y-J (using aperMag3) |
real |
4 |
mag |
-0.9999995e9 |
PHOT_COLOR |
ymj_1Ext |
lasSource |
WSA |
Extended source colour Y-J (using aperMag3) |
real |
4 |
mag |
-0.9999995e9 |
PHOT_COLOR |
Default colours from pairs of adjacent passbands within a given set (e.g. Y-J, J-H and H-K for YJHK) are recorded in the merged source table for ease of querying and speedy querying via indexing of these attributes. Presently, the point-source colours and extended source colours are computed from the aperture corrected AperMag3 fixed 2 arcsec aperture diameter measures (for consistent measurement across all passbands) and generally good signal-to-noise. At some point in the future, this may be changed such that point-source colours will be computed from the PSF-fitted measures and extended source colours computed from the 2-d Sersic model profile fits. |
ymj_1ExtErr |
lasExtendedSource, lasPointSource, lasYJHKsource, reliableLasPointSource |
WSA |
Error on extended source colour Y-J |
real |
4 |
mag |
-0.9999995e9 |
ERROR |
ymj_1ExtErr |
lasSource |
WSA |
Error on extended source colour Y-J |
real |
4 |
mag |
-0.9999995e9 |
ERROR |
Default colours from pairs of adjacent passbands within a given set (e.g. Y-J, J-H and H-K for YJHK) are recorded in the merged source table for ease of querying and speedy querying via indexing of these attributes. Presently, the point-source colours and extended source colours are computed from the aperture corrected AperMag3 fixed 2 arcsec aperture diameter measures (for consistent measurement across all passbands) and generally good signal-to-noise. At some point in the future, this may be changed such that point-source colours will be computed from the PSF-fitted measures and extended source colours computed from the 2-d Sersic model profile fits. |
ymj_1Pnt |
lasExtendedSource, lasPointSource, lasYJHKsource, reliableLasPointSource |
WSA |
Point source colour Y-J (using aperMag3) |
real |
4 |
mag |
-0.9999995e9 |
PHOT_COLOR |
ymj_1Pnt |
lasSource |
WSA |
Point source colour Y-J (using aperMag3) |
real |
4 |
mag |
-0.9999995e9 |
PHOT_COLOR |
Default colours from pairs of adjacent passbands within a given set (e.g. Y-J, J-H and H-K for YJHK) are recorded in the merged source table for ease of querying and speedy querying via indexing of these attributes. Presently, the point-source colours and extended source colours are computed from the aperture corrected AperMag3 fixed 2 arcsec aperture diameter measures (for consistent measurement across all passbands) and generally good signal-to-noise. At some point in the future, this may be changed such that point-source colours will be computed from the PSF-fitted measures and extended source colours computed from the 2-d Sersic model profile fits. |
ymj_1PntErr |
lasExtendedSource, lasPointSource, lasYJHKsource, reliableLasPointSource |
WSA |
Error on point source colour Y-J |
real |
4 |
mag |
-0.9999995e9 |
ERROR |
ymj_1PntErr |
lasSource |
WSA |
Error on point source colour Y-J |
real |
4 |
mag |
-0.9999995e9 |
ERROR |
Default colours from pairs of adjacent passbands within a given set (e.g. Y-J, J-H and H-K for YJHK) are recorded in the merged source table for ease of querying and speedy querying via indexing of these attributes. Presently, the point-source colours and extended source colours are computed from the aperture corrected AperMag3 fixed 2 arcsec aperture diameter measures (for consistent measurement across all passbands) and generally good signal-to-noise. At some point in the future, this may be changed such that point-source colours will be computed from the PSF-fitted measures and extended source colours computed from the 2-d Sersic model profile fits. |
ymjErr |
gcsSourceRemeasurement, lasSourceRemeasurement |
WSA |
Error on colour Y-J |
real |
4 |
mag |
|
ERROR |
ymjExt |
gcsPointSource, gcsZYJHKsource, reliableGcsPointSource |
WSA |
Extended source colour Y-J (using aperMag3) |
real |
4 |
mag |
-0.9999995e9 |
PHOT_COLOR |
ymjExt |
gcsSource |
WSA |
Extended source colour Y-J (using aperMag3) |
real |
4 |
mag |
-0.9999995e9 |
PHOT_COLOR |
Default colours from pairs of adjacent passbands within a given set (e.g. Y-J, J-H and H-K for YJHK) are recorded in the merged source table for ease of querying and speedy querying via indexing of these attributes. Presently, the point-source colours and extended source colours are computed from the aperture corrected AperMag3 fixed 2 arcsec aperture diameter measures (for consistent measurement across all passbands) and generally good signal-to-noise. At some point in the future, this may be changed such that point-source colours will be computed from the PSF-fitted measures and extended source colours computed from the 2-d Sersic model profile fits. |
ymjExtErr |
gcsPointSource, gcsZYJHKsource, reliableGcsPointSource |
WSA |
Error on extended source colour Y-J |
real |
4 |
mag |
-0.9999995e9 |
ERROR |
ymjExtErr |
gcsSource |
WSA |
Error on extended source colour Y-J |
real |
4 |
mag |
-0.9999995e9 |
ERROR |
Default colours from pairs of adjacent passbands within a given set (e.g. Y-J, J-H and H-K for YJHK) are recorded in the merged source table for ease of querying and speedy querying via indexing of these attributes. Presently, the point-source colours and extended source colours are computed from the aperture corrected AperMag3 fixed 2 arcsec aperture diameter measures (for consistent measurement across all passbands) and generally good signal-to-noise. At some point in the future, this may be changed such that point-source colours will be computed from the PSF-fitted measures and extended source colours computed from the 2-d Sersic model profile fits. |
ymjPnt |
gcsPointSource, gcsZYJHKsource, reliableGcsPointSource |
WSA |
Point source colour Y-J (using aperMag3) |
real |
4 |
mag |
-0.9999995e9 |
PHOT_COLOR |
ymjPnt |
gcsSource |
WSA |
Point source colour Y-J (using aperMag3) |
real |
4 |
mag |
-0.9999995e9 |
PHOT_COLOR |
Default colours from pairs of adjacent passbands within a given set (e.g. Y-J, J-H and H-K for YJHK) are recorded in the merged source table for ease of querying and speedy querying via indexing of these attributes. Presently, the point-source colours and extended source colours are computed from the aperture corrected AperMag3 fixed 2 arcsec aperture diameter measures (for consistent measurement across all passbands) and generally good signal-to-noise. At some point in the future, this may be changed such that point-source colours will be computed from the PSF-fitted measures and extended source colours computed from the 2-d Sersic model profile fits. |
ymjPntErr |
gcsPointSource, gcsZYJHKsource, reliableGcsPointSource |
WSA |
Error on point source colour Y-J |
real |
4 |
mag |
-0.9999995e9 |
ERROR |
ymjPntErr |
gcsSource |
WSA |
Error on point source colour Y-J |
real |
4 |
mag |
-0.9999995e9 |
ERROR |
Default colours from pairs of adjacent passbands within a given set (e.g. Y-J, J-H and H-K for YJHK) are recorded in the merged source table for ease of querying and speedy querying via indexing of these attributes. Presently, the point-source colours and extended source colours are computed from the aperture corrected AperMag3 fixed 2 arcsec aperture diameter measures (for consistent measurement across all passbands) and generally good signal-to-noise. At some point in the future, this may be changed such that point-source colours will be computed from the PSF-fitted measures and extended source colours computed from the 2-d Sersic model profile fits. |
yObjID |
gcsPointSource, gcsSource, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSource, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
the UID of the Y detection |
bigint |
8 |
|
-99999999 |
ID_NUMBER |
yObjID |
gcsSourceRemeasurement, lasSourceRemeasurement |
WSA |
the UID of the Y remeasurement |
bigint |
8 |
|
-99999999 |
ID_NUMBER |
yPA |
gcsPointSource, gcsSource, gcsSourceRemeasurement, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSource, lasSourceRemeasurement, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
ellipse fit celestial orientation in Y |
real |
4 |
Degrees |
-0.9999995e9 |
POS_POS-ANG |
yPetroMag |
gcsPointSource, gcsSource, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSource, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
Extended source Y mag (Petrosian) |
real |
4 |
mag |
-0.9999995e9 |
PHOT_MAG |
yPetroMagErr |
gcsPointSource, gcsSource, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSource, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
Error in extended source Y mag (Petrosian) |
real |
4 |
mag |
-0.9999995e9 |
ERROR |
yPixSize |
CurrentAstrometry |
WSATransit |
Angular size of pixels in Y |
real |
4 |
Arcseconds |
-0.9999995e9 |
POS_ANG_DIST_GENERAL |
yPixSize |
CurrentAstrometry, PreviousAstrometry |
WSA |
Angular size of pixels in Y |
real |
4 |
Arcseconds |
-0.9999995e9 |
POS_ANG_DIST_GENERAL |
yPnt |
Plate |
SSA |
Centre of scan area in Y |
real |
4 |
microns |
|
POS_PLATE_Y |
yPos |
nvssSource |
NVSS |
Y position (Dec direction) of the radio source |
real |
4 |
pixels |
|
POS_CCD_Y |
yppErrBits |
gcsPointSource, gcsSourceRemeasurement, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSourceRemeasurement, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
additional WFAU post-processing error bits in Y |
int |
4 |
|
0 |
CODE_MISC |
yppErrBits |
gcsSource, lasSource |
WSA |
additional WFAU post-processing error bits in Y |
int |
4 |
|
0 |
CODE_MISC |
Post-processing error quality bit flags assigned (NB: from UKIDSS DR2 release onwards) in the WSA curation procedure for survey data. From least to most significant byte in the 4-byte integer attribute byte 0 (bits 0 to 7) corresponds to information on generally innocuous conditions that are nonetheless potentially significant as regards the integrity of that detection; byte 1 (bits 8 to 15) corresponds to warnings; byte 2 (bits 16 to 23) corresponds to important warnings; and finally byte 3 (bits 24 to 31) corresponds to severe warnings: Byte | Bit | Detection quality issue | Threshold or bit mask | Applies to | | | | Decimal | Hexadecimal | | 0 | 4 | Deblended | 16 | 0x00000010 | LAS, GCS, GPS, DXS | 0 | 6 | Bad pixel(s) in default aperture | 64 | 0x00000040 | LAS, GCS, GPS, DXS | 2 | 16 | Close to saturated | 65536 | 0x00010000 | LAS, GCS, GPS | 2 | 19 | Possible crosstalk artefact/contamination | 524288 | 0x00080000 | LAS, GCS, DXS | 2 | 22 | Lies within a dither offset of the stacked frame boundary | 4194304 | 0x00400000 | LAS, GCS, GPS, DXS | In this way, the higher the error quality bit flag value, the more likely it is that the detection is spurious. The decimal threshold (column 4) gives the minimum value of the quality flag for a detection having the given condition (since other bits in the flag may be set also; the corresponding hexadecimal value, where each digit corresponds to 4 bits in the flag, can be easier to compute when writing SQL queries to test for a given condition). For example, to exclude all K band sources in the LAS having any error quality condition other than informational ones, include a predicate ... AND kppErrBits ≤ 255. See the SQL Cookbook and other online pages for further information. |
yPsfMag |
gcsPointSource, gcsSource, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSource, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
Point source profile-fitted Y mag |
real |
4 |
mag |
-0.9999995e9 |
PHOT_MAG |
yPsfMagErr |
gcsPointSource, gcsSource, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSource, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
Error in point source profile-fitted Y mag |
real |
4 |
mag |
-0.9999995e9 |
ERROR |
ySeqNum |
gcsPointSource, gcsSource, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSource, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
the running number of the Y detection |
int |
4 |
|
-99999999 |
ID_NUMBER |
ySeqNum |
gcsSourceRemeasurement, lasSourceRemeasurement |
WSA |
the running number of the Y remeasurement |
int |
4 |
|
-99999999 |
ID_NUMBER |
ySerMag2D |
gcsPointSource, gcsSource, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSource, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
Extended source Y mag (profile-fitted) |
real |
4 |
mag |
-0.9999995e9 |
PHOT_MAG |
ySerMag2DErr |
gcsPointSource, gcsSource, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasSource, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
Error in extended source Y mag (profile-fitted) |
real |
4 |
mag |
-0.9999995e9 |
ERROR |
ySize |
MultiframeDetector |
WSA |
Corresponding image size (Y); value only available if catalogue file exists {catalogue extension keyword: NYOUT} |
int |
4 |
|
-99999999 |
NUMBER |
ySize |
MultiframeDetector |
WSATransit |
Corresponding image size (Y); value only available if catalogue file exists {catalogue extension keyword: NYOUT} |
int |
4 |
|
-99999999 |
NUMBER |
yXi |
gcsPointSource, gcsZYJHKsource, lasExtendedSource, lasPointSource, lasYJHKsource, reliableGcsPointSource, reliableLasPointSource |
WSA |
Offset of Y detection from master position (+east/-west) |
real |
4 |
arcsec |
-0.9999995e9 |
POS_EQ_RA_OFF |
yXi |
gcsSource, lasSource |
WSA |
Offset of Y detection from master position (+east/-west) |
real |
4 |
arcsec |
-0.9999995e9 |
POS_EQ_RA_OFF |
When associating individual passband detections into merged sources, a generous (in terms of the positional uncertainties) pairing radius of 2.0 (UKIDSS LAS and GPS; also non-survey programmes) or 1.0 (UKIDSS GPS, DXS and UDS) arcseconds is used, the higher value enabling pairing of moving sources when epoch separations may be several years. Such a large association criterion can of course lead to spurious pairings in the merged sources lists (although note that between passband pairs, handshake pairing is done: both passbands must agree that the candidate pair is their nearest neighbour for the pair to propagate through into the merged source table). In order to help filter spurious pairings out, and assuming that large positional offsets between the different passband detections are not expected (e.g. because of source motion, or larger than usual positional uncertainties) then the attributes Xi and Eta can be used to filter any pairings with suspiciously large offsets in one or more bands. For example, for a clean sample of QSOs from the LAS, you might wish to insist that the offsets in the selected sample are all below 1 arcsecond: simply add WHERE clauses into the SQL sample selection script to exclude all Xi and Eta values larger than the threshold you want. |